Manufacturer of a wide range of products which include digital slide scanner high capacity, conxport grossing workstation single user, conxport grossing workstation two users, conxport microprocessor tissue processor, conxport manual cryostat microtome and conxport slide warming table.
CPU, Intel Core: I7, Hard Disk 1TB; Memory: 16GB; Monitor 24 inches
Digital Slide Scanner incorporates a linear axis magnetic driver for precise operation resulting in excellent high-resolution images of tissues and cells It takes only 40 secs from focusing to digitization, making it incredibly smart.
Grossing Workstation is made of high-grade stainless steel. Continuous airflow along the entire work area. Provided with Dictaphone, Camera Holder, on the railing system, magnifying glass/light magnifier with flexible arms. A document holder for requisition forms, literature etc. Magnetic Instrument holder, paper towel holder, polythene curring board. Mixer tap for hot and cold water with sink. Sprinkler System with an adjustable valve for sanitation located underneath the perforated working plate and drawers.
Features:
Integrated illumination with UV germicidal light
Self-supporting undercarriage with adjustable legs
Removable organiser bins
Safety Splash Shield
An adjustable set of stools with rest to reduce back strain
Grossing Workstation with backdraft ventilation is made up of high-grade stainless steel 304 and has continuous airflow along the entire work area. It has two sprinkler systems for cleaning of the entire work area for both the operators. Control panel, located at the centre is easily controllable by both the operators.
Features:
Made of high grade 304 Stainless Steel
An in-built ventilation system for removing formalin fumes
Storage compartment on both sides
Magnetic tool holder
Sink with hold and cold water faucet
High capacity waste disposal unit
Polyethylene dissecting board with ruler and contrast area to easily see the biopsy
Sturdy perforated insertable work plate
Sprinkler system with an adjustable valve for bath sanitation located underneath the perforated working plate and drawers
Integrated illumination for an entire work area with an additional spotlight
Storage shelf to keep the necessary tools in the reach of operators.
Manual Cryostat Microtome is a high-performance equipment with a retraction mechanism that enables consistently accurate, frozen tissue sectioning in diagnostic and research laboratories. It has motorised specimen advance and sectioning with optional disposable blade holder with anti roll device.
Features:
Manual specimen advance and sectioning
Retraction mechanism ensures the safety of the specimen
Intuitive control panel makes it easy to operate
Spacious Stainless Steel Cryochamber which is easy to clean and disinfect
Hermetically sealed and Thermostatically Controlled refrigeration system
Microprocessor based Slide Staining Machine provides a modern user interface operated through a feather touch keypad, easy to do programming interface and a digital display with a continuous visual update.
Features:
Feather touch keypad
Digital display for adjusting the timing sequence
Battery backup to retain data
Twelve stage timing sequence can be programmed with each step of 1 minute to 16 hours 39 minutes (999 minutes)
Slide Staining Machines not only provides high degree of flexibility and high specimen throughput in histopathology laboratories but also maintains maximum quality and safety. Features:
Touch Screen LCD with user friendly software
Reagent stations are covered when not active to avoid exposure to fumes and minimize reagent loss.
The integrated wash station with supply of fresh water regulated through a solenoid valve avoids reagent carryover when moving from one one stage to another.
Smooth and noiseless lowering and lifting of slide carrier
Battery backup to retain data
Chamber Illumination
Incorporated Exhaust Fan to collect and dispose of fumes
Paraffin Wax Trimmer is used to remove the excess wax from the embedding cassettes by scraping it over a grooved and heated surface prior to sectioning and has an waste tray attached to collect the excess wax. Suitable for all sizes of pathology labs due to compact dimensions. Features:
LED temperature display
Feather touch keypad
Set temperature memorization in case of power failure
Slant & grooved work surface is large enough so that multiple blocks can be trimmed at the same time
Magnetic waste tray with disposable plastic film makes easy disposal of drained wax
Automatic Knife Sharpener provides a precise, efficient and safe method for honing Microtome Knives upto 140mm in length, equipped with automatic timer 0-60 min. to adjust sharpening time. It ensure a knife edge so perfect that no subsequent strooping is necessary. The knife edge is recodtioned to optimum sharpness which is so major importance to every laboratory, where material are routinely sectioned for microscopic examinations. The transparent plexi glass cover encloses the entire working mechanism and provides a safe dust and gritfree sharpening process. The knife strokes against a high frequency glass honing plate and after three exactly equivalent strokes on one side of knife edge, a cam follower automatically flips the knife and three strokes are honed on other side.
Ergonomically designed new Medimeas MCM-ST Fully Automatic Cryostat Microtome for high-quality sectioning, widely used for pathological diagnosis, analysis and research in hospital and medical colleges.
Features:
Motorised Feed Drive
User friendly control panel with LCD display and keypad
Dual compressor for rapid freezing. One compressor for cooling of chamber and freeze shelf and the other for freeze shelf
Arbitrary switching between trimming and sectioning
Adjustable cutting angle
Movable
In-built UV Sterilization
Automatic and Manual Defrosting
New blade holder for finger safety
Enclosed drainage system
Anti-roll device
Section Counter
Frost Free encapsulated microtome assembly
Visible operating parameters at all times
User-Friendly Control Panel
Optional Motorised Sectioning
Electrically heated window to prevent frost formation
M-Series Tissue Processor is based on a pin-up timer through which infiltration time in each station can be programmed. For complete automatic dehydration, infiltration, and fixation of human, animal and plant tissues. Precision gear mechanism assures utmost convenience in operation. Automatic agitation allows efficient processing of tissues. Features:
All 12 station time can be individually programmed using a pin-up timer
In-built safety device to protect the tissues in case of power failure
Imported motor and sturdy gear assembly ensures smooth and silent shifting of tissue baskets
Thermostatically controlled wax baths with temperature range of ambient to 80 deg C.
Continuous rotation of tissue baskets ensures better tissue processing
Request Callback
Yes! I am interested
Conxport Single Phase Mild Steel Laboratory Cold Plate
Get Best Quote
Approx. Price: Rs 50,000 / PieceGet Latest Price
Product Details:
Minimum Order Quantity
1 Piece
Material
Mild Steel
Usage/Application
Laboratory Use
Wattage
100 W
Power Source
Electric
Finishing
Galvanized
Phase
Single Phase
Voltage
230 V
Frequency
50 Hz
Recognized in the year 2010 at ambala, haryana (india), we, contemporary export industries, are one of the well known manufacturers & exporters of medical & hospital equipment under conxport brand . We know that complete client satisfaction is the key to success in the competitive business arena. Our professionals work in close coordination with our customers to fulfil all the requirements within set time frame. Few of our strength includes the following: meeting individual requirements, every order, howsoever big or small is complied with in as per with individual requirements.
A proprietorship firm, our business operations are led by mr. Akhil trehan his experienced handling of the involved business operations, well developed production setup and services of experienced industry professionals assist us in fulfil the prevailing as well as emerging equipment and instrument needs of the medical community.
Vacuum tissue processor is designed for excellent performance and reliability with feature like Stirrer in retort for better infiltration of tissue sample and multi programmable memory gives flexibility to operator to select different programs depending on tissue type.
Simultaneous processing of up to 200 / 300 cassettes
High-quality specimen
Fully automatic reagent management system
Comprehensive monitoring and full process control
Eight programs consisting of up to 9 reagent and 3 paraffin steps
A compact single workstation that enables both specimen orienting and embedding. Ease of operation and convenience characterize, Paraffin Embedding and Cooling Station. Features MTC-TE:
Microprocessor based control systems
Five independent heating zones for better performance; paraffin reservoir, dispensing nozzle, cassette bath, mold warmer, heated forceps holder
Automatic system start & stop (7 day memory)
Electrically heated forceps holder on both sides
Set temperature memorization
Panel temperature display for all heated/cooled areas
The unique linear design offers reliable technique in the small space of a laboratory. MSS-LS has 22 reagent stations each with a volume of 600ml. Five independent programs can be stored in the memory. All the reagent containers are completely closed to prevent evaporation. Chamber exhaust prevents solvent odours and pollution. The immersion time can be set from 0 to 9999 secs. Features:
Feather touch keypad
Digital display for adjusting the timing sequence
Battery backup to retain data
Twelve stage timing sequence can be programmed with each step of 1 minute to 16 hours 39 minutes (999 minutes)
A compact single workstation that enables both specimen orienting and embedding. Ease of operation and convenience characterize the MTC-TE and CP, Paraffin Embedding and Cooling Station.
Microprocessor based automatic tissue processors with large graphic display and multiple program memory. An optional vacuum system is available for both reagent stations and wax bath.
Features:
Microprocessor controlled operations
Large graphical display showing all important parameters
Multi-programmable with up-to 20 programs can be stored in memory
Silent and Smooth operation
Agitation through rotor for better processing
Optional Vacuum for Reagent Stations and Wax Baths
